Graco 258864 Manual De Usuario

Occasionally, debris from material can accumulate and 
clog the spray tip. Perform the following steps to unclog 
the tip.

1.

To unclog tip obstruction, engage trigger lock and 
pull relief valve UP to release pressure. 

2.

Reverse spray tip to UNCLOG position.

3.

Aim sprayer at waste area, disengage trigger lock, 
and put prime/relief valve DOWN to spray position. 
Pull trigger to clear clog.

4.

Engage trigger lock. Put prime/relief valve UP to 
release pressure and rotate spray tip back to 
SPRAY position.

5.

Disengage trigger lock, put prime/relief valve DOWN 
to spray position, and resume spraying.

6.

If tip is still clogged, you may have to repeat steps 
1 - 5 and rotate the tip from SPRAY to UNCLOG 
several times. Repeat step 1 to release pressure, 
remove and clean filter, or replace with new tip 
assembly. 

NOTE: Filter assembly is reverse-threaded:
Turn left (or counter-clockwise) to install.
Turn right (or clockwise) to remove.

7.

If obstruction is cleared, engage trigger lock and 
rotate arrow-shaped handle back to SPRAY 
position.

Do not operate or spray near children. Do not aim the 
sprayer at, or spray any person or animal. Keep hands 
and other body parts away from the discharge. For 
example, do not try to stop leaks with any part of the 
body.

ti14994a

ti14999a

ti14991a

ti14995a

ti15425a

ti14994a

ti14999a

ti14995a

ti15425a

ti14989a

ti14985a

ti14994a