Graco 3A0732J Manual De Usuario
Maintenance
3A0732J
13
Maintenance
Tighten Threaded Connections
Before each use, check all hoses for wear or damage.
Replace as necessary. Check that all threaded connec-
tions are tight and leak-free.
Replace as necessary. Check that all threaded connec-
tions are tight and leak-free.
Flush the Pump
Flush the pump:
•
Before first use
•
When changing colors or fluids
•
Before repairing equipment
•
Before fluid dries or settles out in a dormant pump
(check the pot life of catalyzed fluids)
(check the pot life of catalyzed fluids)
•
At the end of the day
•
Before storing the pump.
Flush at the lowest pressure possible. Flush with a fluid
that is compatible with the fluid you are pumping and
with the wetted parts in your system. Check with your
fluid manufacturer or supplier for recommended flushing
fluids and flushing frequency.
that is compatible with the fluid you are pumping and
with the wetted parts in your system. Check with your
fluid manufacturer or supplier for recommended flushing
fluids and flushing frequency.
1.
2.
Remove tip guard and spray tip from gun. Refer to
separate gun manual.
separate gun manual.
3.
Place suction tube in grounded metal pail containing
cleaning fluid.
cleaning fluid.
4.
Set pump to lowest possible fluid pressure, and start
pump.
pump.
5.
Hold a metal part of the gun firmly to a grounded
metal pail.
metal pail.
6.
Trigger gun. Flush system until clear solvent flows
from gun.
from gun.
7.
8.
Clean the tip guard, spray tip, and fluid filter element
separately, then reinstall them.
separately, then reinstall them.
9.
Clean inside and outside of suction tube and suction
hose.
hose.
Read all Warnings. Follow all Grounding instruc-
tions. See page 8.
tions. See page 8.