Philips Trilogy 200 Manual De Usuario
Trilogy200 clinical manual
60
C. Connect the flow lines and the exhalation valve line to
the Universal Porting Block on the ventilator as shown
below.
below.
•
Connect the White Striped Flow Line to
the top, striped port on the Universal
Porting Block on the device.
Porting Block on the device.
•
Connect the other Flow Line to the
middle port on the Universal porting
Block.
Block.
•
Connect the Exhalation Valve Line to the
Exhalation Valve port on the top of the
active exhalation device, and connect the
other end of the line to the Exhalation
Valve port on the Universal Porting Block.
active exhalation device, and connect the
other end of the line to the Exhalation
Valve port on the Universal Porting Block.
Exhalation Valve Line
Flow Line
Exhalation Valve Port
on Porting Block
on Porting Block
Universal Porting Block
on Trilogy Device
on Trilogy Device
White Striped
Flow Line
Flow Line
Exhalation Valve Port
Refer to the instructions included with the active exhalation
device for more information.
device for more information.
Connect a Water Trap
If you are using an optional water trap, connect it to the patient
circuit according to the manufacturer’s instructions.
circuit according to the manufacturer’s instructions.
Note: When using an active
exhalation device with proximal
flow, ensure that any additional
proximal ports are capped.
exhalation device with proximal
flow, ensure that any additional
proximal ports are capped.
Note: The
symbol
appears next to the Exhalation
Valve port on the Universal
Porting Block to indicate where
the active exhalation valve line
connects.
Valve port on the Universal
Porting Block to indicate where
the active exhalation valve line
connects.
Connecting the Active
Exhalation Device with
Proximal Flow Sensor
Proximal Flow Sensor