Woodstock M1099 Manual De Usuario

-25-

The compound rest is used to cut tapers on parts or to 
set the proper infeed angle when threading. It may also 
be used to cut specific lengths longitudinally, when set 
parallel to the spindle axis. 

(%  Loosen the hex nuts on each side of the compound 

rest (see 

=`^li\),).

)%  While watching the scale, rotate the compound rest 

to the desired angular position.

*%  Tighten the two hex nuts. Be sure to not overtight-

en, as you may strip threads or crack or distort the 
base casting.

The four-way tool post (

=`^li\)-) is mounted on top of 

the compound rest and allows a maximum of four 

3

⁄

8

" x 

3

⁄

8

" tools to be loaded simultaneously.

The four-way tool post allows for quick indexing to new 
tools. This is accomplished by loosening the top handle, 
then rotating the tool post to the desired position. 
Tighten the top handle to lock the tool into position.

Scale

Hex Nut

=`^li\),% Compound rest, scale, and hex 

nuts.

Top Handle

=`^li\)-% Four-way tool post and top 

handle.