Blue Coat Systems SGOS Version 5.2.2 Manual De Usuario
Chapter 4: Diagnostics
59
Diagnostic Reporting (CPU Monitoring)
You can enable CPU monitoring whenever you want to see the percentage of CPU being
used by specific functional groups. For example, if you look at the CPU consumption and
notice that compression/decompression is consuming most of the CPU, you can change
your policy to compress/decompress more selectively.
used by specific functional groups. For example, if you look at the CPU consumption and
notice that compression/decompression is consuming most of the CPU, you can change
your policy to compress/decompress more selectively.
To configure and view CPU monitoring:
1.
Select
Statistics > Advanced
.
2.
Click the
Diagnostics
link.
A list of links to Diagnostic URLs displays.
3.
To enable CPU monitoring, click the
Start the CPU Monitor
link; to disable it, click the
Stop the CPU Monitor
link.
4.
To view CPU monitoring statistics, click the CPU Monitor statistics link. You can also
click this link from either of the windows described in Step 3.
click this link from either of the windows described in Step 3.
Related CLI Syntax to Configure and View CPU Monitoring
SGOS#(config) diagnostics
SGOS#(config diagnostics) cpu-monitor disable | enable
SGOS#(config diagnostics) cpu-monitor interval seconds
Note:
CPU monitoring uses about 2-3% CPU when enabled, and so is disabled by
default.
Note:
The total percentages do not always add up because the display only shows
those functional groups that are using 1% or more of the CPU processing cycles.