Smeg GKC755 Manual De Usuario

 

 

  

 Having carried out the above adjustments, reassemble the appliance 

following, backwards, the instructions in paragraph “5.1 Removing the 
hob”. 

 

   

 Replace the components on the burner and 

slide the knobs on the gas tap pins. Light the 
burner and set it at minimum position. Remove 
the knob and turn the regulation screw inside or 
next to the gas tap pin (depending on the 
model) until you get a suitable minimum flame. 
Replace the knob and check burner flame 
stability: (rapidly turning the knob from 
maximum to minimum position, the flame 
should not go out). 

 

   

 To regulate the minimum for LPG, completely tighten (clockwise) the 

screw inside or next to the gas tap pin (depending on the model). 
The diameters of the by-passes for each burner are given in table “5.2

 

Regulation for LPG”.