BLANCO BC 75 X Manual De Usuario

Electrical connections

The appliance is predisposed to function

with a 230-240V monophase voltage

tension. Connection must be carried out in

conformity with the regulations and

dispositions of the laws in force.
Before connecting ensure that:
- The limiter valve and the electrical mains

can support the voltage of the appliance

(see registration plate).

- The power supply is correctly earthed

according to the regulations in force.

- The plug or omnipolar interrupter used

can be easily reached once the

appliance has been installed.

The appliance is supplied with a supply cord

incorporating a plug. Connect the plug to

an appropriate security socket.
If a direct connection to the mains is

required, an omnipolar interrupter with a

minimum opening of 3mm between

contacts, dimensioned to the voltage and

corresponding to the regulations in force,

should be interposed between the appliance

and the supply. The yellow/green earth

cable must not be interrupted by the

interrupter. The brown coloured phase

cable (situated at terminal L of the terminal

box) must always be connected to the

network phase. The voltage cable must

always be positioned in such a manner that

it at no point reaches a temperature of
50 °C above room temperature. An example

of the best routing is shown in fig. 11.
In case of substitution of the voltage cable

use cable type H05 RRF having a section

suited to the charge, it is furthermore

necessary that the yellow/green earth wire

be approximately 2cm longer than the

phase and neutral wires (Fig. 10).
After connection try out the heating

elements allowing them to function for

approximately 3 minutes.

Ground (yellow - green)

Neutral wire

Phase

FO 0480

Fig.10

Gas

pipeline

Electric

wire

The manufacturer declines all

responsibility in case the prevention of

accidents regulations are not respected.

Fig.11

Gas

pipeline

Electric

wire

Gas

pipeline

Electric

wire

YES