Jura Capresso 13422 Manual De Usuario
57
8 Troubleshooting
8 Troubleshooting
Problem
Cause/Result
Action
Grinder is making a very
loud noise.
loud noise.
There are some foreign
bodies in the grinder.
bodies in the grinder.
T Contact customer support in your
country (see ‘JURA contact details /
Legal information’).
country (see ‘JURA contact details /
Legal information’).
Insufficient foam is
produced when the milk is
foamed or milk sprays from
the cappuccino frother.
produced when the milk is
foamed or milk sprays from
the cappuccino frother.
The cappuccino frother is
dirty.
dirty.
T Rinse and clean the cappuccino
frother (see Chapter 6, ‘Mainte-
nance – Cappuccino frother’).
frother (see Chapter 6, ‘Mainte-
nance – Cappuccino frother’).
Coffee only comes out in
drips when it is being
prepared.
drips when it is being
prepared.
Coffee or pre-ground coffee
has been ground too finely
and is blocking the system.
has been ground too finely
and is blocking the system.
T Put the grinder on a coarser
setting or use coarser pre-ground
coffee (refer to Chapter 2, ‘Preparing
and using for the first time –
Adjusting grinder’).
setting or use coarser pre-ground
coffee (refer to Chapter 2, ‘Preparing
and using for the first time –
Adjusting grinder’).
Water hardness cannot be
adjusted.
adjusted.
The CLARIS filter cartridge
is activated.
is activated.
T Deactivate the CLARIS filter
cartridge.
cartridge.
FILL BEANS
is displayed
although the bean container
has been filled.
has been filled.
The grinder is not yet
completely filled with
beans.
completely filled with
beans.
T Prepare a coffee speciality.
FILL WATER TANK
is
displayed although the
water tank is full.
water tank is full.
The water tank float is
trapped.
trapped.
T Descale the water tank (see
Chapter 6, ‘Maintenance – Descal-
ing the water tank’).
Chapter 6, ‘Maintenance – Descal-
ing the water tank’).
ERROR 2
is displayed.
If the device was exposed to
the cold for a long period of
time, it is disabled from
heating up due to safety
reasons.
the cold for a long period of
time, it is disabled from
heating up due to safety
reasons.
T Warm up the device at room
temperature.
temperature.
Other
ERROR
messages
are displayed.
–
T Turn the IMPRESSA off at the
power switch. Contact customer
support in your country (see ‘JURA
contact details / Legal information’).
power switch. Contact customer
support in your country (see ‘JURA
contact details / Legal information’).
E If you have not been able to solve the problem, contact cus-
tomer support in your country (see ‘JURA contact details /
Legal information’).
Legal information’).