Bunn SNG0033000 Manual De Usuario

Page 11

UNITS

METRIC  DONE   ENG

CHANGING UNITS

WILL!! ERASE!!

ALL PREVIOUSLY

STORED RECIPES

AND ALL  SETUP

INFO WIL BE LOST!

ARE YOU SURE?

YES    

     NO

SELECTS METRIC 

AS THE

UNIT OF MEASURE

REPLACE

EXIT

SELECTS ENGLISH

AS THE

UNIT OF MEASURE

  This function allows the units of measure to be 

set in English or Metric readings for all screens. The 

program is defaulted to English.

WARNING: Changing the unit of measure will erase 

all coffee recipes stored in memory. All  preinfu-

sion, pulse times, etc will also be erased. If using 

this option after information has been stored, it is 

important to have this information stored elsewhere 

so that the machine can be reprogrammed.

1.  Press and hold upper right hidden switch until the 

display reads UNITS. Release switch.  Press and 

release METRIC or ENG to make a selection.

P3260

2. Press DONE to proceed. The display should now 

read CHANGING UNITS!! WILL ERASE!! ... ALL 

INFO WILL BE LOST ... ARE YOU SURE?.

3. Press YES to begin the change. While the change 

is in process, the display will read RESTORING 

DEFAULTS and a count down will begin.

4.  When the count down reaches 0 the display will 

read  SET NEW RECIPE?. The units have been 

reset.

5.  Press and release the  ON/OFF switch (either on 

DUAL brewers) located on the front switch panel 

to exit the UNITS function and return to the MAIN 

41341 080108