Bunn SNG0033000 Manual De Usuario

Page 12

This function allows the operator to enable the ENERGY 

SAVINGS mode function and set the idle time. Once 

the set idle time has expired, the operator can choose 

to have the heaters

either turn off, or reduce the tank 

holding temp to 140° F (60° C).

If enabled, default setting is 140° F (60° C) tank tem-

perature after 4.0 hrs. idle time.

1.  Press and hold the right hidden switch until the 

display reads SET LANGUAGE. Press the right 

hidden switch until the display reads Enabl Ener-

gySavr. The YES or NO will be flashing to indicate 

the current selection.

2.  Press and release NO to disable this function, or:

3.  Press and release YES to enable this function (the 

heaters will either turn off or the tank will hold at 

140° F).

4.  When finished, press and release DONE to save 

the new setting and advance to the next function 

screen.

5. If NO was selected, the display should now read 

SET NEW RECIPE ?. To exit programming and 

return to the MAIN SCREEN, press and release 

the ON/OFF switch (either for DUAL Brewers).

6. If YES was selected, the display should now read 

X.X HRS -> IDLE. This screen allows the opera-

tor to set the amount of time the brewer is not in 

use before nap mode engages. Using (-) and (+), 

adjust the idle time. When finished, press and 

release DONE.

7.  The display should now read AFTER IDLE TIME?  

Once the set idle time has expired, the heaters can 

either be shut off or held at a lower temperature 

of 140° F.

8.  To have the machine shut off after the set idle time, 

press and release OFF and then DONE to save the 

settings. The display should read MACHINE OFF 

AFTER X.X HRS, and then SET NEW RECIPE ?.

9.  To have the heaters hold at the lower 140° F tem-

perature, press and release 140° and then DONE 

to save the settings. The display should read 

MACHINE AT 140° AFTER X.X HRS, and then SET 

AFTER IDLE TIME?

OFF      DONE      140°

MACHINE OFF

AFTER X.X HRS

MACHINE AT 140°

AFTER X.X HRS

SET NEW RECIPE ?

NO      DONE      YES

WITH NO FLASHING 

PRESS DONE TO 

ADVANCE TO

ENABLEFRESHTIMER

X.X  HRS ->  IDLE

(-)      DONE      (+)

Enabl EnrgySavr

NO      DONE      YES

WITH YES FLASHING 

PRESS DONE

10. Once the idle time has expired, the display will 

read either ENERGY SAVER...NO TEMPERATURE 

or ENERGY SAVER...REDUCED TEMPERATURE, 

depending on the settings. This screen will alternate 

with PRESS ANY SWITCH TO RE-HEAT.

41341 101911