Bunn MCAA Manual De Usuario

Descargar
Página de 23
15
Follow the directions as printed on the manufacturer’s package.
1)  Fill the reservoir with descaling product as described by the manufacturer’s directions, 
or 946 ml (32 oz.) of white vinegar. 
Do not add powder mix 
directly to the reservoir. Descaling product must be mixed 
into a solution before it is added to the reservoir.
2)  Place an empty pod holder into the brewer. Be sure the holder 
is locked into place, and set the VOLUME CONTROL SLIDE 
LEVER to the maximum position.
3)  Place an empty container or bowl on the drip tray grate that 
will hold at least 414 ml (14 oz.) of liquid, and press the 
COFFEE BREW BUTTON to start a brew cycle.
4)  Once the brew cycle has finished, empty the container and 
set it back onto the drip tray grate. Press the COFFEE BREW 
BUTTON again to start a second brew cycle.
5)  Once the brew cycle has finished, empty the container and 
the remaining solution, or vinegar from the reservoir. Remove 
the Pod Holder; clean the reservoir and pod holder thoroughly 
using a mild detergent, then rinse.
NOTE: There is now descaling solution in the internal tank. Follow 
the manufacturer’s directions if the solution must be left in the tank 
for any period of time. For vinegar, allow the solution to sit for at 
least two, but no more that four hours.
6)  Fill the reservoir to the maximum line with fresh clean cold 
water and place the pod holder back into the brewer.
7)  Place the empty container back onto the drip tray grate and 
press the COFFEE BREW BUTTON to begin a brew cycle.
P2963
ROUTINE  CLEANING
P2906
P2907
P2908
PERIODIC CLEANING/DESCALING
(Recommended At Least Once a Month.)
Periodically, you should clean and descale the brewer to clear any mineral deposits 
that may have accumulated due to impurities in the water source. If these deposits are not 
removed, they can impair the operation of the brewer and reduce the product life.
There are several products available specifically for descaling. We recommend using 
URNEX
®
 Activated Descaler or JavaClean2 Cleaner and Descaler, available on our web 
site: www.bunn.com. (White vinegar can be used to descale if a descaling product is not 
available.) 
Before beginning any cleaning procedure, unplug the brewer to 
avoid the accidental start of a brew cycle.
Clean the pod holder, drip tray and drip tray grate after each 
use, using a damp cloth and mild detergent and rinse. With the 
pod holder and drip tray removed, use a damp cloth with mild 
detergent to wipe the area below the pod holder and into the 
drip tray area. Occasionally, wipe the outside of the brewer with 
a damp cloth. (The reservoir, slide lid, pod holder, drip tray and 
drip tray grate are dishwasher safe.)