Bunn MCP Manual De Usuario

14

7)  Place the empty cup or bowl back onto the drip tray grate and press the 

COFFEE BREW BUTTON to begin a brew cycle.

8)  When the cycle has finished, empty the cup. Repeat step 7 at least two 

more times to remove the solution from the tank.

9)  Clean the pod holder with a mild detergent and rinse thoroughly.

10)  Proceed to the “Cleaning The Sprayhead/Seal” section.

1)  Press the Power Switch into the off “O” position. 

2)  Unplug the brewer and allow it to cool down. (Minimum of 1 hour.)

3)  After the unit has been allowed to cool, remove the pod holder and set 

aside.

4)  Using your fingers, rotate the sprayhead/seal 

assembly clockwise until the sprayhead and seal are 

removed.

NOTE: If the sprayhead and seal are separated, they 

NOTE: See “Assembling Sprayhead/Seal” (Page 14) & 

5)  Clean the sprayhead and seal with a mild detergent and rinse thoroughly.

6)  Using your fingers, rotate the sprayhead/seal assembly counter-clockwise 

until it is finger tight.

7)  Replace the pod holder.

8)  Plug in the brewer and press the POWER SWITCH to restore power to 

the brewer.

If the sprayhead and seal are separated during removal or cleaning, they 

must be reassembled properly.
1)  Identify the top of the seal. The top of the seal that 

seats against the roof of the sprayhead ramp has a  

rough ridge that can be felt by running your fingers 

across the surface of the seal. The bottom is smooth.

2)  Identify the top of the sprayhead. The top of the 

sprayhead has a star pattern and a threaded hole 

where the sprayhead attaches to the brewer. 

3)  While carefully stretching the seal, guide the 

sprayhead into the channel of the seal.  Make sure it 

is completely in the channel.

 

When properly assembled, the sprayhead will slide 

easily into the channel of the seal and will not cause any 

buckles in the surface of the seal. If the sprayhead seems 

to be difficult to seat, and you must stretch the seal more 

than a slight tug, the assembly is not together correctly.

CAUTION: Improper reassembly could result in 

Top