Bunn MCP Manual De Usuario
17
SITUATION
EXPLANATION
The REFILL WATER
INDICATOR has come on.
INDICATOR has come on.
The POD HOLDER
INDICATOR has come on.
INDICATOR has come on.
The water shuts off and
comes back on again
when brewing.
comes back on again
when brewing.
The WATER RESERVOIR has run low on
water.
water.
Slide the lid open and pour additional
water into the reservoir, or remove the
reservoir and fill it at a sink, or other
water source.
water into the reservoir, or remove the
reservoir and fill it at a sink, or other
water source.
CAUTION: Do not place the brewer in a
sink or other water source. Do not fill
past the Maximum fill line.
sink or other water source. Do not fill
past the Maximum fill line.
The POD HOLDER is missing.
Place the pod holder into the machine
and press it firmly into place.
and press it firmly into place.
The POD HOLDER is not locked in place.
Carefully remove and re-insert the pod
holder into the machine while listening
for a clicking sound. The POD HOLDER
INDICATOR on the control panel
should go out.
holder into the machine while listening
for a clicking sound. The POD HOLDER
INDICATOR on the control panel
should go out.
The TEA BREW BUTTON has been pressed
to start the brew cycle.
to start the brew cycle.
Do NOT press the TEA BREW or
COFFEE BREW button during the
brew cycle. This will stop the brew
cycle. The brewer is using a Pulse
Brew
COFFEE BREW button during the
brew cycle. This will stop the brew
cycle. The brewer is using a Pulse
Brew
™
technology to steep tea properly.
The water will shut off and turn on
again. This is normal and will take about
45 seconds to complete. Wait for the
blue lights to go out.
again. This is normal and will take about
45 seconds to complete. Wait for the
blue lights to go out.
NOTE: Although the pulse brew process
can be used for coffee or tea, it is
designed to brew tea. Because the process
of brewing tea is different than coffee,
the brewer works differently when the
TEA BREW BUTTON is used. An “On-Off-
On” cycle is used to steep the tea and
provide the maximum flavor extraction.
The action is a cycling of the water flow,
causing the water to go off and come
back on. This is normal.
can be used for coffee or tea, it is
designed to brew tea. Because the process
of brewing tea is different than coffee,
the brewer works differently when the
TEA BREW BUTTON is used. An “On-Off-
On” cycle is used to steep the tea and
provide the maximum flavor extraction.
The action is a cycling of the water flow,
causing the water to go off and come
back on. This is normal.