NuTone 761WHNT Manual De Usuario

3. Set housing aside and drive nails partially into joist at the 

top of both keyhole marks.

4. hang housing from nails and pound nails tight. To ensure 

a noise-free mount, pound another nail through the top 

hole of each mounting tab.

2. in  attic,  position  mounting  brackets  against  joist.  Trace 

outline of housing on ceiling material.

1. Choose the location for your fan/light in the ceiling. for 

best possible performance, use the shortest possible duct 

run and a minimum number of elbows.

3. Set housing aside and cut ceiling opening slightly larger 

than marked.

1. Choose the location for your fan in the ceiling. for best 

possible performance, use the shortest possible duct run 

and a minimum number of elbows.

2. Position mounting brackets against joist so that bottom  

edge of housing will be flush with finished ceiling.

 

 

holes in corners of housing are labeled with various 

ceiling material thicknesses. Position housing so 

bottom edge of joist is visible through a matched 

set  of  holes.  The  housing  is  now  in  the  proper 

position for that ceiling material thickness.

 

Bend two tabs, on side of housing, 90

0

 outward. Lift 

housing until tabs contact underside of joist.

  Mark the keyhole slot on both mounting brackets.

TAB

hOLES

BOTTOM EDgE Of JOiST