Philips V200 Manual De Usuario

 

Respironics V200 Ventilator Operator’s Manual

REF 1057983 A

•

Tools Required: Small Phillips screwdriver

1. Ensure that the ventilator is properly positioned on a secure table top, 

wall mount, or pedestal.

2. Connect the AC Power Cord (1) to the AC inlet (3) located on the rear 

panel. (Refer to Figure 5-1.)

3. After cord is fully inserted, tighten the retaining bracket screw (2) so 

that the power cord cannot be inadvertently disconnected from the 
ventilator.

The ON/OFF (

/

) switch is located in the lower portion of the front panel, 

and is recessed to avoid inadvertent access.

When the switch is in OFF (

) position, the ventilator does not provide 

mechanical ventilation. If the AC plug is connected and the Mains circuit 
breaker (refer to Figure 5-1) is ON (

), AC power is active and the green 

Mains circuit indicator on the front panel, is illuminated.

Inop

Vent

Safety

Valve

Power On/
Off Switch