Samsung SM713BM 17" TFT LS17MJSTSE Manual De Usuario

85Hz, the display will work properly 
but the "Not Optimum 

Mode","Recommended Mode 
1280 x 1024 60Hz" message 

appears for one minute and then 

disappears.  
Please change to the recommended 

mode during this one-minute period. 
 

(The message is displayed again if 
the system is rebooted.) 

There is no image on the 
screen.  
Is the power indicator on 

the monitor blinking at 1 
second intervals?

The monitor is in PowerSaver mode. 
 
press a key on the keyboard to 

activate the monitor and restore the 
image on the screen.  

 
If there is still no image, press the 
'Source' button.  

Then press any key on the keyboard 
again to activate the monitor and 

restore the image on the screen.

Is the monitor connected 

using the DVI cable?

You may get a blank screen if you 

boot the system before you connect 
the DVI cable, or disconnect and 

then reconnect the DVI cable while 
the system is running as certain 
types of graphic cards do not send 

out video signals. 
Connect the DVI cable and then 

reboot the system.

The screen shows 

strange colors or just 
black and white.

Is the screen displaying 

only one color as if looking 
at the screen through a 

cellophane paper? 

Check the signal cable connection. 

Make sure the video card is fully 
inserted in it's slot.

Have the screen colors 

become strange after 
running a program or due 
to a crash between 

applications?

Reboot the computer.

Has the video card been 
set properly?

Set the video card by referring to the 
video card manual. 

The screen suddenly 
has become 

unbalanced.

Have you changed the 
video card or the driver?

Adjust screen image position and 
size using the OSD.

Have you adjusted the 
resolution or frequency to 

the monitor?

Adjust the resolution and frequency 
at the video card.  

(Refer to the 

Preset Timing Modes

).

The screen can be unbalanced due to the cycle of the video card signals. 

Readjust Position by referring to the OSD.

The screen is out of 
focus or OSD cannot 
be adjusted.

Have you adjusted the 
resolution or frequency on 
the monitor?

Adjust the resolution and frequency 
of the video card. 
(Refer to the 

Preset Timing Modes

).

LED is blinking but no 
images on the screen.

Is the frequency properly 
adjusted when checking 

the Display Timing on the 
menu?

Adjust the frequency properly by 
referring to the video card manual 

and the 

Preset Timing Modes

.  

(The maximum frequency per 

resolution may differ from product to 
product.) 

There are only 16 
colors shown on the 
screen. 

The screen colors 

Have the Windows colors 
been set properly? 

Windows ME/2000/XP: 
Set the colors properly at the 
Control Panel → Display → 
Settings.