Samsung SM713BM 17" TFT LS17MJSTSE Manual De Usuario

 

have changed after 
changing the video 
card.

Has the video card been 
set properly?

Set the video card by referring to the 
video card manual. 

There is a message 
that reads 

"Unrecognized 
monitor, Plug & Play 

(VESA DDC) monitor 
found". 

Have you installed the 
monitor driver?

Install the monitor driver according 
to the 

Driver Installation Instructions

.

See the video card 

manual to see if the Plug 
& Play (VESA DDC) 
function can be supported. 

Install the monitor driver according 

to the 

Driver Installation Instructions

.

Problems related to 

Audio 

No sound 

Ensure that the audio cable is firmly 

connected to both the audio-in port 
on your monitor and the audio-out 
port on your sound card.  

(Refer to the 

Connecting Your 

Monitor

)  

 
Check the volume level. 

Sound level is too low. 

Check the volume level.  
 
If the volume is still too low after 

turning the control to its maximum, 
check the volume control on the 

computer sound card or software 
program.

Check when 
MagicTune does not 

function properly. 

MagicTune feature is 
found only on PC (VGA) 

with Window OS that 
supports Plug and Play.

* To check whether your PC is 
available for MagicTune feature, 

follow the  
  steps below (When Windows is 
XP);  

 
Control Panel -> Performance and 

Maintenance -> System -> 
Hardware -> Device Manager -> 
Monitors -> After deleting Plug and 

Play monitor, find 'Plug and Play 
monitor' by searching new 

Hardware. 

MagicTune is an additional software 

for the monitor. Some graphic cards 
may not support your monitor. When 

you have a problem with the graphic 
card, visit our website to check the 
compatible graphic card list 

provided. 

http://www.samsung.com/monitor/magictune

MagicTune™ doesn't 
work properly.

Have you changed your 
PC or video graphic card?

Download the latest program. The 
program can be downloaded 

http://www.samsung.com/monitor/magictune

.

Visit our website and download the installation software for MagicTune MAC.

 
 

 

 

1. Check if the power cord and the video cables are properly connected to the computer.  
2. Check if the computer beeps more than 3 times when booting. 

(If it does, request an after-service for the main board of the computer.)  

3. If you installed a new video card or if you assembled the PC, check if the installed the adapter

(video) driver and the monitor driver.  

4. Check if the scanning ratio of the video screen is set at 56Hz ~ 75Hz.  

(Do not exceed 75Hz when using the maximum resolution.)  

5. If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode, 

remove the Display Adapter at the "Control Panel→System→Device Administrator" and then 
reboot the computer to reinstall the adapter (video) driver.