GE 10-95 CG Manual De Usuario

TIME

OVEN

16

1. CLEAR/OFF. Press this pad to cancel all

oven operations except clock and timer.

2. PROGRAM STATUS. Words light up in the

display to indicate what is in time display.

Programmed information can be displayed at any
time by pressing the pad of the operation you want
to see. For example, you can display the current
time of day while the timer is counting down by
pressing the CLOCK pad.

3. TIME DISPLAY. Shows the time of day, the times

set for the timer or automatic oven operation.

DISPLAY. Shows the oven temperature or the 
broil setting selected.

5. FUNCTION INDICATORS. Lights up to 

show whether the oven is in the bake, broil or self-
clean mode.

6. INCREASE. Short taps to this pad increase the

time or temperature by small amounts. Press and
hold the pad to increase the time or temperature by
larger amounts.

7. TIMER ON/OFF. Press this pad to select the timer

function. The timer does not control oven operations.
The timer can time up to 9 hours and 55 minutes.

To set the timer, first press the TIMER ON/OFF
pad. Then press the + or – pad to change the time. 

To cancel the timer, press and hold the TIMER
ON/OFF pad until the word “TIMER” disappears
from the display.

8. CLOCK. Press this pad before setting the clock.

To set the clock, first press the CLOCK pad. 
Then press the + or – pad to change the time of 
day. Press the CLOCK pad to start.

9. STOP TIME. Use this pad along with the COOK

TIME or the CLEAN pad to set the oven to stop
automatically at a time you select.

10. COOK TIME. Press this pad for Timed Bake

operations.

11. AUTO SELF CLEAN. Press this pad to select

the self-cleaning function. See the Operating the
Self-Cleaning Oven section.

12. BROIL. Press this pad to select the broil function. 

13. BAKE. Press this pad to select the bake function. 

14. DECREASE. Short taps to this pad decrease 

the time or temperature by small amounts. 
Press and hold the pad to decrease the time or
temperature by larger amounts.

If “F–and a number” flash in the display and
the oven control signals, this indicates function
error code. If the function error code appears
during the self-cleaning function, check the oven
door latch—the latch handle may have been
moved, even if only slightly, from the latched
position. Make sure the handle is to the right as far
as it will go. Press the CLEAR/OFF pad. Allow
the oven to cool for one hour. If function error
code repeats, disconnect the power to the range
and call for service.

14

6

13

12

11

10

4

5

3

2

9

8

7

1