GE 10-95 CG Manual De Usuario
OVEN CONTROL, CLOCK AND TIMER
Clock
To Set the Clock
The clock must be set for the
automatic oven timing functions
to work properly. The time of day
cannot be changed during a Timed
Baking or a Self-Cleaning cycle.
automatic oven timing functions
to work properly. The time of day
cannot be changed during a Timed
Baking or a Self-Cleaning cycle.
1. Press the CLOCK pad.
2. Press the + or – pad to
set the time of day.
3. Press the CLOCK pad to start.
+
–
CLOCK
Timer
To Set the Timer
The timer is a minute timer only.
The timer does not control
oven operations. The maximum
setting on the timer is 9 hours and
55 minutes.
oven operations. The maximum
setting on the timer is 9 hours and
55 minutes.
1. Press the TIMER
ON/OFF pad.
2. Press the + or – pad to
set the amount of time
on timer.
on timer.
The timer will start automatically
within a few seconds of releasing
the pad.
within a few seconds of releasing
the pad.
The timer, as you are setting it,
will display seconds until 1 minute
is reached.
will display seconds until 1 minute
is reached.
Then it will display minutes
and seconds until 10 minutes
is reached.
and seconds until 10 minutes
is reached.
After 10 minutes, it will display
hours (“HR” now appears in
display) and minutes until the
maximum time of 9 hours and
55 minutes is reached.
hours (“HR” now appears in
display) and minutes until the
maximum time of 9 hours and
55 minutes is reached.
+
–
TIMER
ON/OFF
Power Outage
End of Cycle Tone
Display Messages
After a power outage, when power
is restored, the display will flash
and time shown will no longer be
correct—for example, after a 5-
minute power interruption the
clock will be 5 minutes slow.
All other functions that were in
operation when the power went out
will have to be programmed again.
is restored, the display will flash
and time shown will no longer be
correct—for example, after a 5-
minute power interruption the
clock will be 5 minutes slow.
All other functions that were in
operation when the power went out
will have to be programmed again.
The end of cycle tone is a series
of 3 beeps followed by 1 beep
every 6 seconds. If you would like
to remove the signal that beeps
every 6 seconds, press and hold the
CLEAR/OFF pad for 10 seconds.
of 3 beeps followed by 1 beep
every 6 seconds. If you would like
to remove the signal that beeps
every 6 seconds, press and hold the
CLEAR/OFF pad for 10 seconds.
To return the signal that beeps
every 6 seconds, press and hold the
CLEAR/OFF pad for 10 seconds.
every 6 seconds, press and hold the
CLEAR/OFF pad for 10 seconds.
If “door” appears in the display,
the door latch handle is not moved
all the way to the right. Move the
latch handle and cleaning will
start. If “LOCK” appears in the
display, the oven door is in the
locked position. BAKE, BROIL
and COOK TIME cannot be set if
the door is in the locked position.
the door latch handle is not moved
all the way to the right. Move the
latch handle and cleaning will
start. If “LOCK” appears in the
display, the oven door is in the
locked position. BAKE, BROIL
and COOK TIME cannot be set if
the door is in the locked position.
To Reset the Timer
To Cancel the Timer
If “TIMER” is displayed, press the + or – pad
until the desired time is reached.
until the desired time is reached.
If “TIMER” is not displayed, press the TIMER
ON/OFF pad first, then follow the instructions above
to set the timer.
ON/OFF pad first, then follow the instructions above
to set the timer.
Press the TIMER ON/OFF pad until the word
“TIMER” disappears from the display.
“TIMER” disappears from the display.
Featur
es of Y
our Oven Contr
ol
Oven Contr
ol, Clock and T
imer
17