Hearth & Home Technologies VRT-GR-B-CE Manual De Usuario

24

Heat & Glo  •  VRTIKL-CE  •  7031-292 Rev E  •  12/07

The gas stove is bolted and screwed to the pallet for ship-
ping. Use a 1/2 in. socket to remove the bolt in center of 
bottom plate. Use a Phillips screwdriver to remove the two 
screws in the front of the bottom plate and the two screws 
holding the metal strap across the back of the gas stove.  
Refer to Figure 8.2 for locations.

Remove shipping materials from inside or underneath the 
fi rebox.

The gas line is shipped inside back panel.  To access the gas 
line remove the top plate from the gas stove. Remove and 
retain the two Allen head screws that hold the back panel in 
place. Replace panel when fi nished. 

Tipping Risk
•  Install gas stove on a stable, level platform/

fl oor strong enough to support gas stove 
without tipping. 

• USE 

wood 

fl ooring, ceramic tile, brick hearth 

or high pressure laminate fl ooring applied 
directly over the sub-fl ooring material.

After unbolting the gas stove from the pallet, insert two 1/4 
20 x 1-1/2 (or equivalent) counterscrews.

Using pliers, adjust the counterscrews to level the gas 
stove.