Furuno FCR-28x9 Manual De Usuario

5.  RADAR MAP AND TRACK

Marks and lines can be inscribed in the radar mode. (Marks cannot be entered in the 
chart radar mode.) These marks and lines can be displayed in red, green, blue, cyan, 
magenta, yellow or white. (Some marks, lines and colors may not be available de-
pending on the specifications of your radar.)

The capacity for map storage is 10 maps/4,000 points per map. When you save 4,000 
points to a map, the message "MARK FULL" replaces the mark icon in the [Mark] box 
and you cannot save any more marks to that map. In this case save the marks/lines 
to a different map file or erase some marks from the full map file in order to save the 
mark.

The procedure below shows how to enter a mark, including mark selection, mark entry 
method, and save location. You can skip steps in the procedure where it is not neces-
sary to complete the corresponding action.

1. Put the cursor on the mark shown in the [Mark] box at the bottom-left position on 

the display.

2. Spin the scrollwheel to select a mark. The name of the mark appears to the right 

of the mark.

3. Select mark color (B-type only), mark position, and where to save the mark as fol-

lows:
1)  Right-click the [Mark] box to show the context-sensitive menu then click [Mark 

Color].

2) Click the mark color desired.
3) At the context-sensitive menu, click [Mark 

Position] to select the mark input method. 
The choices are [CURSOR], [OWN SHIP] 
and [L/L].
For L/L, the mark is inscribed at the L/L 
position entered at [1 OWN SHIP MARK] on the [Map/Mark] menu.

Minimize button

Selected mark

Map file no.

Name of mark