Furuno FCR-28x9 Manual De Usuario

6.  CHART OVERVIEW

You can split the screen in two, horizontally 
or vertically, in the Voyage navigation 
mode.

To activate the split screen or return to the 
full screen, click the [DISP] and [TWO DISP] 
buttons on the InstantAccess bar to show 
the choices for screen division. Click the 
screen division desired.

The example below shows the vertical split 
screen.The orientation mode and the range 
for the sub view are fixed to those in use before splitting the screen. The active display 
can be switched by clicking an [ACTIVE] button at the top of the display. The dividing 
line between the main and sub views cannot be moved.

Note 1: The display may not be updated when switching to the Voyage planning 
mode. If this occurs, switch to the Voyage navigation mode, restore the split screen 
display then return to the Voyage planning mode.

Note 2: The own ship mark may not appear at the screen center when releasing the 
split screen display. If this occurs, click the indication T[M/CU Reset] at the top right 
position on the screen to show the own ship mark at the screen center.

Full screen

Vertical split 
screen

Horizontal split 
screen

Main View

Sub View

Click ACTIVE button to 
switch active display.