Furuno FCR-28x9 Manual De Usuario

7.  HOW TO MANAGE CHARTS

When you load charts from a CD ROM, the system first loads a catalog, which stores 
certain information into your SSD such as cell IDs, their position, and edition number, 
from the install media. Then, the system asks which charts you want to load from the 
chosen media. After building the catalog, you can view the contents of it by using by 
clicking the [Cell Status] button.

Note: When installing charts, do not cancel the installation while it is in progress. Can-
cellation will automatically reset the power, stopping the installation. If this occurs, try 
to install the charts again. If the charts still cannot be installed, reset the power and try 
again. 

1. Set the media into its drive.
2. Get into the Chart maintenance mode then click the [AUTO Load] button on the 

InstantAccess bar. A prompt informs you that it may take a while to do the loading 
and are you sure to continue.
Click the [OK] button. The following message appears.

When the system finds charts on the DVD drive it displays the results. The exam-
ple below shows an example for ENC charts. To cancel the search, click the [Can-
cel] button.

3. Click the [OK] button. Loading then starts automatically. A status bar appears and 

shows the percentage of completion, with digital and analog indications.