Furuno FCR-28x9 Manual De Usuario

10.  C-MAP CHARTS

•  If you are using both services (ENC and SENC deliveries) having the same chart 

name loaded into the system through both deliveries, priority of displaying the chart 
is in ENC delivery.

•  Chart updates for ENC delivery are only for charts of ENC delivery and chart up-

dates for SENC delivery is only for charts of SENC delivery. You have to keep 
charts up-to-date separately.

•  If you change from ENC delivery to SENC delivery, remove old charts from the sys-

tem before loading charts from new delivery.

C-MAP charts are S57 charts displayed together with ENC (S57) and CM93/3 charts. 
These charts have the priority order shown below.

1. CM- ENC
2. C-MAP 93/3 Prof and C-MAP 93/3 Prof+
If the same navigational purpose charts are available over an area, priority is as shown 
above. Areas where ENC is not available CM-ENC charts are shown. Where C-MAP 
Prof or CM93 Prof+ are available, CM 93/3 charts are displayed.

The chart legend provides various data about the chart currently displayed. To find 
info for current position, click the [TM/CU Reset] button then click the [Chart INFO] but-
ton on the InstantAccess bar followed by the [Chart Legend] button. To find info for a 
specific location, put the cursor on the location then right-click and select [Chart Leg-
end]. Click the Close button to close the display.

This system is capable of showing more than one chart at a time. This feature is called 
the multi-chart display. If one chart does not cover the whole display, the system will 
open more chart cells for display, if appropriate cells for the displayed area are avail-
able. The chart legend shows information about charts displayed on the electronic 
chart display area.

Name: Name of chart.
Source: Source of chart.
Edition: Edition number of the chart.
Edition Date: Date the edition was published.
Update Number: Update number

Chart Legend