Furuno FCR-28x9 Manual De Usuario

11.  CHART ALERTS

Official S57 chart material contains depth contours that can be used for calculation of 
chart alerts. A chart database also includes different types of objects that the operator 
can use for chart alerts. The procedure for setting chart alerts is outlined below.

1. Choose suitable safety contour for your own ship. See the next section for how to 

set the safety contour.

2. In the Voyage planning mode, define a new route or choose an existing one. Make 

a chart alert calculation of the route if there are indications of danger areas in the 
route. Modify your route if necessary and do the chart alert calculation again. To 
modify an existing route see section 12.5.

3. Choose route as monitored route.
4. Set check area for your own ship.
The system is now ready for chart alert calculation of monitored route and estimated 
own ship position.

Select safety depth suitable for the own ship.

1. Click the [DISP], [SET] and [Chart DISP] buttons on the InstantAccess bar to show 

the [Chart Alert] page.

2. Enter desired depth at [Safety Contour] then click the [Save] button.
A depth contour is created on the chart according to the safety contour value entered.

Note: If the chart does not contain chosen depth contour, the system will automatically 
choose next deeper contour.