Furuno FCR-28x9 Manual De Usuario

Descargar
Página de 423
16.  NAVIGATION SENSORS
16-8
16.5
Source of Navigation Data
The figure below shows how various sources of navigation data are chosen. "SOG, 
COG" is speed over the ground and course over the ground, respectively. "SPD" is 
speed through the water.”Drift” is the difference between speed through the water and 
speed over ground.
Heading used by the system is shown at the top-right position on the chart radar dis-
play. In the example shown below, heading is received from a gyrocompass and it is 
shown without additional text, meaning the value is referenced to true North. Addition-
al gyro-related text that may appear is "(GYRO-A)" if the value is referenced to mag-
netic North.
SOG/COG used by the system is shown at the top-right position on the chart radar 
display. In the example below, COG and SOG are from chosen position sensors and 
this is indicated with the text "GPS*" or "LOG*" (* is the number of sensors).
Analog gyro 
signal
Heading sensor 
selected as high 
priority
Alert 450
“Heading 
Sensor Not
Available”
Heading
used by
this system
Selected
Valid data exists
Valid data exists
Not selected
No valid
data exists
GPS1
No valid
data exists
Heading sensor 
selected as low 
priority
SOG/COG
used by
this system
Valid data exists
Valid data exists
No valid
data exists
COG/SOG 
calculated from 
speed log
COG/SOG from
position sensor