Furuno FCR-28x9 Manual De Usuario
25. MAINTENANCE AND TROUBLESHOOTING
25-7
25.6
Consumable Parts
The table below lists the consumable parts in the antenna unit, Monitor Units, Proces-
sor Unit and Sensor Adapters. Replace the parts before their expected expirations.
sor Unit and Sensor Adapters. Replace the parts before their expected expirations.
Consumable parts
The expected life figures are typical values. Actual life depends on usage and ambient
temperature.
temperature.
Part
Type
Life
Remarks
Antenna Unit
Antenna motor
D8G-516 (24 rpm, X-band)
D8G-571 (42 rpm, X-band)
RM-7398 (21/26 rpm, S-band)
RM-7435 (21/26 rpm, S-band)
RM-9519 (45 rpm, S-band)
RM-9520 (45 rpm, S-band)
D8G-571 (42 rpm, X-band)
RM-7398 (21/26 rpm, S-band)
RM-7435 (21/26 rpm, S-band)
RM-9519 (45 rpm, S-band)
RM-9520 (45 rpm, S-band)
Gear motor 10,000
hours
hours
Carbon brush
MG120-5X6X11 D8G (X-band)
10,000 hours
Check for wear when re-
placing magnetron.
Replace if worn.
placing magnetron.
Replace if worn.
Magnetron
RTR-078A: MAF1565N
(X-band, 12 kW)
(X-band, 12 kW)
5,000 hours
Check no. of hours used
at TX time. Reset time
after replacement.
at TX time. Reset time
after replacement.
MG5436 (X-band, 25 kW)
5,000 hours
MG5223F (S-band, 30 kW)
7,000 hours
Monitor Unit
BEZEL (19) &
LCD ASSEMBLY
LCD ASSEMBLY
MU-190
50,000 hours
BEZEL (23) &
LCD ASSEMBLY
LCD ASSEMBLY
MU-231
50,000 hours
Processor Unit EC-3000
CPU Fan
109R0612G429
8.5 years
Power Fan
109P0612H761
8.5 years
Chassis Fan
109P0612H761
8.5 years
Sensor Adapter MC-3000S
MC-CS Board
24P0114
8.5 years
Sensor Adapter MC-3010A
MC-ANLG Board 24P0115
7.0 years