Furuno FCR-28x9 Manual De Usuario

1.  OPERATIONAL OVERVIEW

Cursor data appears in the Cursor position box at the top-right position on the display. 
The appearance of the box is slightly different between the 23-inch and 19-inch dis-
plays, although the content is the same.

The indication below the cursor position can show the range and bearing to the cursor 
or x-y coordinates of the cursor position. Click that indication and select [Range-Bear-
ing position] or [x-y position] as appropriate. For the X-Y coordinate display, the
Y-axis is the heading line, right/top is "plus" and left/lower is "minus".

Note 1: The cursor bearing can be selected to true or relative with [1 CURSOR BEAR-
ING] in the [CURSOR] menu. Right-click the indication and select [Cursor Menu] to 
open the [CURSOR] menu.

Note 2: The cursor position is shown as "---.-" when the cursor is not within the effec-
tive display area.

Note 3: For the Cursor position box that appears in the Chart mode, see section 6.6.

This radar system accepts navigation data input two ways: System or Local. System 
shares sensor data among multiple radars in a network. Sensor priority is also com-
monly shared among the radars. Local selects a sensor outside the network.

1. Right-click anywhere in the Sensor information box to show the context-sensitive 

menu.

2. Click [Local] or [System] as applicable.

Note: The sensor system can also be selected in the chart mode through this pro-
cedure and through the menu. Open the menu then select [7 OWN SHIP INFO] 
followed by [1 SENSOR].

Cursor position
(lat/lon)

Bearing and 
range to cursor 
position

Time to go to 
cursor position

x and y 
coordinates of 
cursor position

Click indication to switch 
between bearing and range and
x and y coordinates.

ng]

System

Local

Select Sensor

[OS Info Menu]

[Setting]