Furuno FCR-28x9 Manual De Usuario

2.  RADAR, CHART RADAR OPERATION

The zoom function enlarges an area of interest twice the normal viewing size, in the 
information area. To use the zoom display, right click the operational area to show the 
context-sensitive menu then select [Zoom Set]. Roll the trackball to put the zoom cur-
sor on the area to zoom. See the zoom display at the right side of the screen.

The heading line indicates the ship's heading in all presentation modes. The heading 
line is a line from the own ship position to the outer edge of the radar display area and 
appears at zero degrees on the bearing scale in head-up mode. It changes its orien-
tation in the north-up and true motion modes according to orientation.

To temporarily extinguish the heading line (and anything but radar echoes within the 
display area) to look at targets existing dead ahead of own ship, push the HL OFF key 
on the Control Unit, or click the [HL OFF] button on the InstantAccess bar. Release 
the respective control to redisplay the heading line, etc.

The stern marker, which is a dot-and-dash line, appears opposite to the heading line 
and marks your ship’s stern. To display or erase this marker, do the following:

1. Open the main menu.
2. Select [5 MAP MARK] and [1 MARK SETTING].
3. Select [6 STERN MARK] (B type) or [5 STERN MARK] (IMO and A types).
4. Select [ON] or [OFF] as appropriate.

Zoom
cursor

Zoom
display