Furuno FCR-28x9 Manual De Usuario

2.  RADAR, CHART RADAR OPERATION

You can preset the antenna and display combinations for each antenna and display 
in the radar system. As an example, the procedure below shows how to select the no. 
1 antenna unit for the no. 2 display unit.

1. Open the menu then select the [8 INITIAL SETTING] and [5 ANT SELECT] 

menus.

2. Select the display unit for which to select an antenna (at the next step). For exam-

ple, select [DISP2] to select the no. 2 display unit.

3. Select [ANT1] and [M].
4. Repeat steps 2 and 3 to set other display and antenna combinations.
5. Click [STORE INT-SW] and select [YES] to save your selections.
6. Close the menu.

DISP1

DISP2

DISP3

DISP4

ANT1

ANT2

ANT3

ANT4

HUB-3000

← Processor Unit

← Radar Processor Unit

← Antenna Unit

Using the information displayed in this example the antenna system configuration would 
look something like this.

ANT 1  : X-BAND
25UP     Main Top

ANT 2  : S-BAND
30UP     Main 2nd

ANT 3  : X-BAND
12          Fore

ANT 4  : X-BAND
12          Aft