Polycom 40/0 Manual De Usuario
System Initialization
Polycom, Inc.
20
Configure IP Settings through Admin Portal
The RealPresence Capture Server system supports both IPv4 or IPv4 & IPv6 network communications. You
can configure parameters to be used for network communication, including system IP address, DNS server,
and NAT server.
can configure parameters to be used for network communication, including system IP address, DNS server,
and NAT server.
To set IP:
1 Go to Configuration > IP Settings and configure the following settings:
Set IP Parameters
The RealPresence Capture Server system supports IPv6 system management.
Parameter
Description
Enable Network Separation
Select this check box to route the management, streaming traffic and video call
traffic through LAN 1 and LAN 2 interfaces separately.
This offers higher security for the signaling data.
traffic through LAN 1 and LAN 2 interfaces separately.
This offers higher security for the signaling data.
Obtain an IP Address
Automatically (DHCP)
Automatically (DHCP)
If you select this radio button, RealPresence Capture Server obtains an IPv4
address automatically via DHCP.
Note: Obtaining an IP address automatically is not recommended. For best results,
assign a static IP to RealPresence Capture Server.
address automatically via DHCP.
Note: Obtaining an IP address automatically is not recommended. For best results,
assign a static IP to RealPresence Capture Server.
Using the following IP
Address
Address
•
IP Address: the IP address of the system.
•
Subnet Mask: the subnet mask of the system.
•
Default IPv4 Gateway: the address of the interface to use for accessing the IPv4
gateway.
gateway.
•
Preferred DNS Server: the preferred DNS server address for the system to
resolve domain names.
resolve domain names.
•
Alternate DNS Server: the alternate DNS server address for the system to
resolve domain names.
resolve domain names.
Enable IPv6
Specify whether to enable IPv6 related functions.
Obtain an IP Address
Automatically (IPv6)
Automatically (IPv6)
Specify whether to obtain the IPv6 address automatically using Stateless Address
Auto-configuration (SLAAC).
Note: Obtaining an IP address automatically is not recommended. For best results,
the system should be configured with a static IP address.
Auto-configuration (SLAAC).
Note: Obtaining an IP address automatically is not recommended. For best results,
the system should be configured with a static IP address.
Using the following IP
Address (IPv6)
Address (IPv6)
Select this option to manually configure a static IPv6 address:
•
•
Link Local Address: Specify an address for link local communication.
Routers do not forward packets with link local addresses.
•
Site Local Address: Specify an address for site local communication.
Routers do not forward packets with site local addresses.
•
Global Address: Specify one or several address for communication with
external IPv6 networks. Separate several addresses with a comma (,).
external IPv6 networks. Separate several addresses with a comma (,).
•
Default IPV6 Gateway: Specify the address of the interface to use for accessing
the IPv6 gateway.
the IPv6 gateway.