Polycom 40/0 Manual De Usuario

 

System Initialization

Polycom, Inc. 

21

2 Configure the following general settings:

3 Click Add to add static routes. You need to enter the following information for each route:

4 Click OK. The system restarts to apply your changes.

Enable ICMP V6 DAD

Specify whether to enable Duplicate Address Detection (DAD) to ensure the IPv6 
address set to the system is unique in the local network.

Enable ICMP Echo

Specify whether to allow the system to respond to an ICMP (Internet Control 
Message Protocol) echo request (Ping) sent from other devices in the network. 
In some high-security environments, you may need to disable this option to protect 
the system from Ping attacks.

MTU

Specify the Maximum Transmission Unit (MTU) size.

LAN Speed

Specify the speed or duplex modes for the LAN port. Select Auto to let the system 
set the speed automatically.
Note: When setting the LAN port speed, contact your network administrator to 
ensure that the switch link rate matches the system port speed.

NAT Public (WAN) Address

Set the external IP address in Network Address Translation (NAT) environment.
NAT environments use private internal IP addresses for devices within the network, 
while using one external IP address to allow devices outside the LAN to access 
Capture Server Web Portal, view live streaming or VoD playback.

Host Name

Specify the host name of the system.

Domain

Specify the domain name of the system.

Destination

Specify the IP address of the destination network.

Gateway

Specify the IP address of the gateway to access the destination network.

Subnet Mask

Specify the subnet mask for the destination network.