Cal Flame Barbeque Grill Manual De Usuario

Page 10 

2007 Barbecue Grill and Cart Owner’s Manual

 

LTR20071038, Rev. B

Disconnect or shut off the liquid propane or natural 
gas line connect to the grill. Wait until the burners 
cool down.

Open the hood and remove the grate and flame 
tamer on top of the burner you want to replace.

1.

2.

Through the access door underneath the grill, find 
the round stud and locking pin that locks the burner 
you want to replace.

Carefully remove the locking pin with your fingers.

Raise the stud from the locking hole and move 
the burner forward carefully to release it from the 
ignition and gas supply valve.

Take the burner out of the grill and store it in a safe 
and dry place.

Install the infrared burner. Align the gas inlet on 
the burner with the gas supply valve on the grill 
and torch tube with ignition. Make sure they align 
perfectly.  Slide the stud at the other end into the 
locking hole. 

Adjust the infrared burner. Make sure the burner is 
aligned and in position. 

Install the locking pin. Through the access door 

underneath the grill, find the stud to lock the burner 
in place. Install the locking pin. Make sure the 
locking pin is secured correctly.

Repeat steps 2 through 9 if you want to replace 
other burners.

Put back the grate you just removed. (You don’t 

need the flame tamer for infrared burners.)

Reconnect or turn on the gas line.

If you want to change back to regular burners, just 
follow the procedure above in reverse order.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.