Renesas R5S72625 Manual De Usuario
Section 26 USB 2.0 Host/Function Module
Page 1398 of 2108
R01UH0134EJ0400 Rev. 4.00
Sep
24,
2014
SH7262 Group, SH7264 Group
Bit Bit
Name
Initial
Value R/W Description
Value R/W Description
11 ATTCH 0 R/W*
1
ATTCH Interrupt Status
Indicates the status of the ATTCH interrupt when the
host controller function is selected.
host controller function is selected.
0: ATTCH interrupts not generated
1: ATTCH interrupts generated
When this module has generated J-state or K-state
of the full-speed or low-speed level signal for 2.5
of the full-speed or low-speed level signal for 2.5
s,
this module detects the ATTCH interrupt and sets
this bit to 1. Here, if the corresponding interrupt
enable bit has been set to 1, this module generates
the interrupt.
this bit to 1. Here, if the corresponding interrupt
enable bit has been set to 1, this module generates
the interrupt.
Specifically, this module detects the ATTCH interrupt
on any of the following conditions.
on any of the following conditions.
K-stateSE0, or SE1 changes to J-state, and J-
state continues 2.5
s.
J-state, SE0, or SE1 changes to K-state, and K-
state continues 2.5
s.
When the function controller function is selected, the
read value is invalid.
read value is invalid.
10 to 7
All
0
R
Reserved
These bits are always read as 0. The write value
should always be 0.
should always be 0.