Graco 24K960 Manual De Usuario

1.

Perform Grounding Procedure (page 8) if using 
flammable materials. 

2.

Fill throat packing nut with Throat Seal Liquid (TSL) 
to decrease packing wear. 

3.

Check engine oil level. Add SAE 10W-30 (summer) 
or 5W-30 (winter). See engine manual.

4.

Fill fuel tank.

5.

Set pump valve OFF.

6.

If removed, install strainer.

7.

Turn prime valve down. Turn pressure control coun-
terclockwise to lowest pressure.

NOTE: Minimum hose size allowable for proper 
sprayer operation is 3/8 in. x 20 ft (9.5mm x 6mm).

8.

Place siphon tube set in grounded metal pail par-
tially filled with flushing fluid. Attach ground wire to 
true earth ground. Do 1. - 5. of Startup to flush out 
storage oil shipped in sprayer. Use water to flush 
water-base paint and mineral spirits to flush oil-base 
paint and storage oil.

9.

Apply brake.

This equipment stays pressurized until pressure is 
manually relieved. To help prevent serious injury from 
pressurized fluid, such as skin injection, splashing 
fluid and moving parts, follow the Pressure Relief 
Procedure when you stop spraying and before 
cleaning, checking, or servicing the equipment.

ti3307a

ti3308a

ti3309a

ti6470a

ti3430a

ti6473a

ti3441a

ti3310a

ti18550a