Samsung SCX-6545N Manual De Usuario

89 _Machine status and advanced setup

It enables the network 
authentication mode. When the 
users already belong to a server-
based networks, the Network 
Authentication system can be 
simply configured with the existing 
server. Then the user can access 
with the ID and password stored in 
the remote authentication server.
To use any features in Network 
Authentication mode, the users 
have to get a certificate from SMB, 
FTP, LDAP, or Keberos server 
defined in SyncThru™ Web 
Service.

When you install the optional FDI 
kit, select Foreign Device 
Interface Configuration Setup to 
activate it.
•

Job Timer: If there is not 
enough credit, you can set the 
machine to cancel a job right 
away or wait a designated 
amount of time for a deposit.

•

Print Job Control: When it is 
enabled, the both computer 
printing and copying are 
possible since the credit 
remains. With Disable, only 
the copy printing job needs the 
credit. (which means a 
computer printing a report or a 
fax job needs no credits)

•

Inhibit Services: When no 
credit is left, the machine 
disables the copy job only with 
Copy Only. With All Services, 
scanning service and copy job 
are disabled.

•

Internal Credits: It is used 
when you cancel the job or 
when the job is cancelled by 
the device due to insufficient 
credits (coin) or is canceled by 
user’s request. If you select 
Enable, the machine deposits 
a credit equal to the number of 
sheets that did not print out 
correctly, then it prints next job 
for free (for the amount 
deposited). With Disable, even 
if you cancel the printing job, 
the machine includes jammed 
paper in the count and the cost 
of printing.

•

Image Counter: Depends on 
whether the machine counts 
blank white pages.

It disables accounting features. 

You can set the network account 
for users by using SyncThru™ 
Web Admin Service’s job 
accounting plug-in. When the 
users performs their copy, fax, 
print, or scan service job with the 
machine, the account module 
records it. You can see the report 
from the SyncThru™ Web Admin 
Service.

You can set the local account for 
maximum 500 users. When the 
users perform their copy, fax, 
print, or scan service job with the 
machine, the account module 
records it. You can see the report 
from Standard Acct. Usage 
Report in  Machine Setup > 
Admin Setting > Print/Report tab 
> Accounting Reports.
As the device itself can manage 
user’s ID and usage without any 
remote server, this feature is 
highly suitable for small and 
medium businesses.

The accounting system 
regards storing a file to a 
single server as a single 
count.

•

Accounting ID List: It shows 
the accounting ID list. You can 
add, edit, or delete the ID.

•

Login Setting: You can 
configure for user to login 
either with ID and password 
(ID & password Login) or with 
ID only (ID only Login).

•

Accounting ID List: It shows 
the accounting ID list. You can 
add, edit, or delete the ID.

•

Login Setting: You can 
configure for user to login 
either with ID and password 
(ID & password Login) or with 
ID only (ID only Login).