Panasonic NNSN973S Manual De Usuario
20
Timer Feature
This feature allows you to program the
oven as a kitchen timer. It can also be used
to program a standing time after cooking is
completed and/or to program a delay start.
oven as a kitchen timer. It can also be used
to program a standing time after cooking is
completed and/or to program a delay start.
To Use as a Kitchen Timer:
Example: To count down 5 minutes.
1.
• Press Timer/Clock
once.
2.
• Set desired amount
of time using number
pads.
(up to 99 minutes and
99 seconds).
pads.
(up to 99 minutes and
99 seconds).
3.
• Press Start.
Time will count down
without oven
operatings.
operatings.
To Set Stand Time:
Example: To cook at P6 power for 3
minutes, with stand time of 5
minutes.
1.
Press 5 times
• Enter the desired
Power level (see
page 13 for directions).
page 13 for directions).
2.
• Set desired cooking
time using number
pads.
pads.
3.
• Press Timer/Clock
once.
4.
• Set desired amount
of Stand Time using
number pads. (up to 99
minutes and 99 sec-
onds)
number pads. (up to 99
minutes and 99 sec-
onds)
5.
• Press Start.
Cooking will start.
After cooking, stand
time will count down
without oven
operating.
time will count down
without oven
operating.
CAUTION:
If oven lamp is lit while using the timer
feature, the oven is incorrectly pro-
gramed. Stop oven immediately and re-
read instructions.
If oven lamp is lit while using the timer
feature, the oven is incorrectly pro-
gramed. Stop oven immediately and re-
read instructions.
To Set Delay Start:
Example: To delay the start of cooking
for 5 minutes, and cook at P6
power for 3 minutes.
1.
• Press Timer/Clock
once.
2.
• Enter desired amount of
delay time using number
pads. (up to 99 minutes
and 99 seconds)
pads. (up to 99 minutes
and 99 seconds)
3.
Press 5 times
• Enter the desired
Power level (see
page 13 for directions).
page 13 for directions).
4.
• Set desired cooking
time using number
pads.
pads.
5.
• Press Start.
Delay time will
count down. Then
cooking will start.
cooking will start.
NOTE:
1. When each stage fi nishes, a two-beep
signal sounds. At the end of the program,
the oven will beep fi ve times.
the oven will beep fi ve times.
2. If the oven door is opened during Stand
Time, Kitchen Timer or Delay Time, the
time on the display will continue to count
down.
time on the display will continue to count
down.
3. Stand time and Delay start cannot be
programmed before any automatic
Function. This is to prevent the starting
temperature of food from rising before
defrosting or cooking begins. A change
in starting temperature could cause inac-
curate results.
Function. This is to prevent the starting
temperature of food from rising before
defrosting or cooking begins. A change
in starting temperature could cause inac-
curate results.
PA_F0003BK00AP_Eng_PP01_0208.indd 20
PA_F0003BK00AP_Eng_PP01_0208.indd 20
2013-2-8 9:34:26
2013-2-8 9:34:26