Crestron electronic CLS-EXP-DIMU Manual De Usuario

iLux™ Expansion Module   

Crestron CLS-EXP-DIMU

 

Enclosure 

Surface mount module with (2) 
integral mounting flanges, 
galvanized steel w/gray matte 
powder coat front panel, 
extruded aluminum heat sink, ½” 
and ¾” conduit knockouts 
provided on bottom and lower 
left & right sides 

Environmental 

 Temperature 

 Humidity 
 

 Heat 

Dissipation 

 

32° to 104°F (0° to 40°C) 

10% to 90% RH  
(non-condensing) 

200 BTU/Hr at maximum load 

Dimensions 
 Height 
 Width 
 Depth 
 Weight 

 
8.82 in (22.40 cm) 
6.39 in (16.23 cm) 
3.18 in (8.08 cm) 
3.34 lbs (1.52 kg) 

Compatible Control 
Devices 

 CLS(I)-C6 

Series 

 CLW-DIM 

Series 

 CLW-DIMXRF 

Series 

 CLX(I)-1DIM4 
 

 CLX-1DIM8 
 

 CLX(I)-2DIM2 
 

 CLX(I)-2DIM8 
 

 DIN-1DIMU4 

 
 

iLux Integrated Lighting System 

Wall Dimmers 

infiNet™ Wall Dimmers 

Four Channel Dimmer Module, 
Single Feed 

Eight Channel Dimmer Module, 
Single Feed 

Two Channel Dimmer Module, 
Two Feeds 

Eight Channel Dimmer Module, 
Two Feeds 

DIN Rail Universal Dimmer 

This product is Listed to applicable UL Standards and requirements by Underwriters Laboratories Inc. These devices have 
been additionally evaluated to UL 2043, The Standard for Fire Test for Heat and Visible Smoke Release for Discrete 
Products and Their Accessories Installed in Air-Handling Spaces. 

     

(E103692)

 

As of the date of manufacture, the CLS-EXP-DIMU has been tested and found to comply with specifications for CE marking. 

 

NOTE:  This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this 
device may not cause harmful interference and (2) this device must accept any interference received, including interference 
that may cause undesired operation. 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the 
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential 
installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in 
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee 
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures: 

ƒ  Reorient or relocate the receiving antenna. 

ƒ  Increase the separation between the equipment and receiver. 

ƒ  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

ƒ  Consult the dealer or an experienced radio/TV technician for help. 

•  iLux™ Expansion Module: CLS-EXP-DIMU Installation