Bradford-White Corp Convection Heater Manual De Usuario

 

5

This water heater has been manufactured for operation at altitudes from sea 
level to 2000 feet (610m) (unless otherwise specified on the water heater rating 
plate).  For use of this appliance at an elevation greater than 2000 feet (610m), 
contact the dealer or manufacturer listed on the rating plate for information on 
any necessary modification.  Uncorrected operation of this appliance may 
create a hazard to life and property. 
 
Make sure that you check the rating plate and combination gas control on the 
water heater to be certain that the type of gas being supplied corresponds with 
the marking on the rating plate and combination gas control. 
 

 
A sacrificial anode is used to extend tank life. The removal of this anode, for any 
reason, will nullify the warranty. In areas where water is unusually active, an 
odor may occur at the hot water faucet due to a reaction between the sacrificial 
anode and the impurities in the water. If this should happen, an alternative anode 
may be purchased from the supplier that installed this water heater. This will 
minimize the odor while protecting the tank. Additionally, the water heater 
should be flushed with appropriate dissolvers to eliminate any bacteria. 

Before proceeding, please inspect the water heater and components for 
possible damage.  DO NOT install any damaged components.  If damage is 
evident then please contact the supplier where the water heater was 
purchased or the manufacturer listed on the rating plate for replacement 
parts.