Philips SFF6135D/GBB Manual De Usuario

Modifying the Basic Settings

Settings

Cursor Navigation 6

Set Up Power Saving Function 

You use this function to set after what period of time
the device switches to power saving mode following the
print job. Whenever you receive a fax or if you would
like to print or make a copy, your device will automati-
cally switch back from its energy saving mode to its
operating mode.

1 Press 

ECO.

2 Use 

[ to select 

POWER SAVE.

3 Confirm with 

OK.

4 Select the time (in minutes) after which the device

should switch to power saving mode using 

[. You

can choose between: 0, 2, 10, 30 minutes (factory
default: 2 minutes). Select 

0 if the device should

switch to the power saving function immediately
after a print job.

5 Confirm with 

OK.

Set Up Toner Saving Function 

You use this function to switch on the toner saving func-
tion. The print appears a little paler, thereby increasing
the number of pages that you are able to print with one
toner cartridge.

1 Press 

ECO.

2 Use 

[ to select 

TONER SAVE.

3 Confirm with 

OK.

4 Use 

[ to select whether you would like to turn the

function on or off.

5 Confirm with 

OK.

Set Up Paper Saving Function 

Using this function, switch on automatic Duplex printing
for printing and copying in order to save paper. With
Duplex printing, both sides of the paper are printed.

1 Press 

ECO.

2 Use 

[ to select 

PAPER SAVE.

3 Confirm with 

OK.

4 Select one-sided print (Simplex) or double-sided

print (Duplex) using 

[. 

5 Confirm with 

OK.

The changed settings are stored as new
default settings. If you select a special function
for a one-time process, take care to restore
the default settings or factory settings after
that.

You can also edit the device settings with the
device's web interface (see also the chapter
Web Interface, page  20).

You can move the cursor using 

[. Press C

to return to the previous menu level. Press 

j

to close the menu and return to the starting
mode.

You can also call the function by pressing

C, 0021 and OK. 

You can also call the function by pressing

C, 0022 and OK. 

You can also call the function by pressing

C, 0023 and OK.