Philips SFF6135D/GBB Manual De Usuario

Page Header

Your name and number are added together with date,
time and page number at the top edge of each fax trans-
mission (= header).

1 Press 

C, 021 and OK.

2 Enter your name. You can enter characters using the

numeric keys (see key labels).  Enter special charac-
ters using 

0. Press the respective key several

times until the desired character or special character
appears on the display.

3 Confirm with 

OK.

1 Press 

C, 022 and OK.

2 Enter your number.

3 Confirm with 

OK.

Selecting the Ring Tone

You can use this function to select the standard ring
tone. You can assign a separate ring tone to entries in
the telephone book (see also chapter on  saving an entry,
page  39).

1 Press 

C, 054 and OK.

2 Select the desired ring tone using 

[.

3 Confirm with 

OK.

1 Press 

C, 055 and OK.

2 Select the desired volume level using 

[.

3 Confirm with 

OK.

Setting the Number of Rings

You can use this function to set the number of rings for
the fax reception mode. After the selected number of
rings, the device switches to fax reception in the fax
mode. Select 

0 to switch off the ring tone completely

(see also chapter on  silent fax reception , page  59).

1 Press 

C, 042 and OK.

2 Select the desired number of rings using 

[.

3 Confirm with 

OK.

Deactivating the Button Tones

Every key press is accompanied by a sound. You can
switch off the key tones on your device.

1 Press 

C, 007 and OK.

2 Use 

[ to select whether you would like to turn the

function on or off.

3 Confirm with 

OK.

Modifying the Basic Settings

1 Press 

C, 201 and OK.

2 Using 

[ select the weight of the inserted paper.

3 Confirm with 

OK.

Introduction

You can insert normal printing paper or printed docu-
ments (forms) into the paper tray. You can insert spe-
cial paper formats, envelopes, slides, sheets of labels or
printed documents into the manual paper feed.

1 Press 

C, 202 and OK.

2 Using 

[ select the paper source.

3 Confirm with 

OK.

Spaltenumbruch

1 Press 

C, 203 and OK.

2 Using 

[ select whether you would like to configure

the paper format for the paper tray or whether you
would like to use the manual feed.

3 Confirm with 

OK.

4 Use  

[ to select the desired paper format. Follow

the specifications in the technical data.

5 Confirm with 

OK.

You can move the cursor using 

[. Use C

to delete individual characters.

The changed settings are stored as new
default settings. If you select a special function
for a one-time process, take care to restore
the default settings or factory settings after
that.