Cisco ASA 5510 DRAM, 512 MB ASA5510-MEM-512= Manual De Usuario
Los códigos de productos
ASA5510-MEM-512=
2
Release Notes for the Cisco ASA 5500 Series, Version 8.2(x)
OL-18971-02
Important Notes
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
Workaround: Configure a class-map, and then add the class command to the policy-map, and then
define actions for the class. Or, remove the incomplete service and/or policy-map commands
(CSCte03164).
define actions for the class. Or, remove the incomplete service and/or policy-map commands
(CSCte03164).
•
For Smart Call Home Version 3.0(1), full support for the adaptive security appliance on the backend
server is not yet available. The following features are not available, and will only be available in
Cisco Smart Call Home Version 3.1 (not yet released):
server is not yet available. The following features are not available, and will only be available in
Cisco Smart Call Home Version 3.1 (not yet released):
a.
Web portal reports related to Threat, Telemetry, and Snapshot messages.
b.
Configuration message parsing to generate a feature list on the web portal.
c.
Diagnostic messages that trigger any action, such as to open an SR case.
•
The Advanced Inspection and Prevention Security Services Card (AIP SSC) can take up to 20
minutes to initialize the first time it boots after a new image is applied. This initialization process
must complete before configuration changes can be made to the sensor. Attempts to modify and save
configuration changes before the initialization completes will result in an error.
minutes to initialize the first time it boots after a new image is applied. This initialization process
must complete before configuration changes can be made to the sensor. Attempts to modify and save
configuration changes before the initialization completes will result in an error.
•
See the
for downgrade issues after you upgrade the
Phone Proxy and MTA instance, or if you upgrade the activation key with new 8.2 features.
•
For detailed information and FAQs about feature licenses, including shared licenses and temporary
licenses, see Managing Feature Licenses for Cisco ASA 5500 Version 8.2 at
licenses, see Managing Feature Licenses for Cisco ASA 5500 Version 8.2 at
.
•
When using Clientless SSL VPN Post-SSO parameters for the Citrix Web interface bookmark,
Single Sign On (SSO) works, but the Citrix portal is missing the Reconnect and Disconnect buttons.
Only the Log Off button appears. When not using SSO over Clientless, all three buttons show up
correctly.
Single Sign On (SSO) works, but the Citrix portal is missing the Reconnect and Disconnect buttons.
Only the Log Off button appears. When not using SSO over Clientless, all three buttons show up
correctly.
Workaround: Use the Cisco HTTP-POST plugin to provide SSO and correct Citrix portal behavior.
•
On the ASA 5510, Version 8.2 uses more base memory than previous releases. This might cause
problems for some ASA 5510 users who are currently running low on free memory (as indicated in
the show memory command output). If your current show memory command output displays less
than 20% free, we recommend upgrading the memory on the ASA 5510 from 256 MB to 512 MB
before proceeding with the Version 8.2 upgrade. See the
problems for some ASA 5510 users who are currently running low on free memory (as indicated in
the show memory command output). If your current show memory command output displays less
than 20% free, we recommend upgrading the memory on the ASA 5510 from 256 MB to 512 MB
before proceeding with the Version 8.2 upgrade. See the
.