Cisco ASA 5510 DRAM, 512 MB ASA5510-MEM-512= Manuel D’Utilisation

class-map inspection_default

 match default-inspection-traffic

policy-map type inspect dns preset_dns_map

 parameters

  message-length maximum 512

policy-map global_policy

 class inspection_default

  inspect dns preset_dns_map 

  inspect ftp 

  inspect h323 h225 

  inspect h323 ras 

  inspect rsh 

  inspect rtsp 

  inspect esmtp 

  inspect sqlnet 

  inspect skinny 

  inspect sunrpc 

  inspect xdmcp 

  inspect sip 

  inspect netbios 

  inspect tftp 

service-policy global_policy global

Workaround: Configure a class-map, and then add the class command to the policy-map, and then 
define actions for the class. Or, remove the incomplete service and/or policy-map commands 
(CSCte03164).

For Smart Call Home Version 3.0(1), full support for the adaptive security appliance on the backend 
server is not yet available. The following features are not available, and will only be available in 
Cisco Smart Call Home Version 3.1 (not yet released):

Web portal reports related to Threat, Telemetry, and Snapshot messages.

Configuration message parsing to generate a feature list on the web portal.

Diagnostic messages that trigger any action, such as to open an SR case.

The Advanced Inspection and Prevention Security Services Card (AIP SSC) can take up to 20 
minutes to initialize the first time it boots after a new image is applied. This initialization process 
must complete before configuration changes can be made to the sensor. Attempts to modify and save 
configuration changes before the initialization completes will result in an error.

See the 

 for downgrade issues after you upgrade the 

Phone Proxy and MTA instance, or if you upgrade the activation key with new 8.2 features.

For detailed information and FAQs about feature licenses, including shared licenses and temporary 
licenses, see Managing Feature Licenses for Cisco ASA 5500 Version 8.2 at 

.

When using Clientless SSL VPN Post-SSO parameters for the Citrix Web interface bookmark, 
Single Sign On (SSO) works, but the Citrix portal is missing the Reconnect and Disconnect buttons. 
Only the Log Off button appears. When not using SSO over Clientless, all three buttons show up 
correctly.

Workaround: Use the Cisco HTTP-POST plugin to provide SSO and correct Citrix portal behavior. 

On the ASA 5510, Version 8.2 uses more base memory than previous releases. This might cause 
problems for some ASA 5510 users who are currently running low on free memory (as indicated in 
the show memory command output).  If your current show memory command output displays less 
than 20% free, we recommend upgrading the memory on the ASA 5510 from 256 MB to 512 MB 
before proceeding with the Version 8.2 upgrade. See the 

.