Generac Power Systems 009600-5 Manual De Usuario

36 Generac

®

Power Systems, Inc.

❑ Generator is properly located.
❑ Generator is properly supported.
❑ Generator is properly restrained.

❑ Compartment construction is proper.
❑ Holes/Openings are vapor-sealed.
❑ Compartment size is correct.
❑ Compartment is vapor-sealed.
❑ Sound insulation is correct.
❑ Floor cutouts are properly completed.

❑ Airflow is adequate.
❑ Air inlet opening is correct.
❑ Compensate for restrictions.
❑ Check that installation has been tested.

❑ Fuel tank complies with all applicable codes.
❑ Fuel system is properly installed and checked 

for leaks.

❑ Fuel system is properly installed and checked 

for leaks.

❑ Pressure at regulator inlet is correct.
❑ Rated flow of primary regulator is correct.
❑ All parts are properly installed.
❑ Fuel system is properly tested/adjusted.

❑ Exhaust system complies with all applicable codes.
❑ Exhaust system is properly and safely installed.

❑ Connections comply with local code requirements

and all National Electrical Codes.

❑ Junction box is properly installed.
❑ Wiring meets all standards.
❑ All connections are correct.
❑ Conduit is properly installed and sealed.
❑ Generator is properly bonded to the vehicle.

❑ Recommended battery is installed.
❑ Recommended cables are installed.
❑ Cables are clean and tight.
❑ Cables are connected properly.
❑ Proper ventilation is provided.
❑ Terminals are coated with anti-corrosion grease, and

terminal covers are positioned.

❑ Check that remote start/stop panels (if used) are

installed properly.

❑ Check that hourmeter kit (if used) is installed 

properly.

❑ Check that any other options and accessories (if

used) are installed properly.

❑ Check that all tests are completed properly.

◆

◆

◆

◆

◆

◆

◆

◆

◆

◆