Xerox 6300 Manual De Usuario

This section includes:

■

■

■

■

■

If you are using SNMP, you must configure it using CentreWare IS. If you are not using 
SNMP, disable it to prevent unauthorized access through applications that use SNMP. For 
information on disabling SNMP, see 

on page 4-19.

The Current State field on the SNMP Configuration page identifies the SNMP 

enable/disable status. Possible values include SNMP v3 Enabled, SNMP v1/v2c Enabled, 
and All SNMP Protocols Disabled.

Use CentreWare IS to configure SNMP for maximum security:

Launch your web browser.

Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx). 

Click Properties.

Select SSL:

Select the Security folder on the left sidebar, and then select SSL. 

If prompted, enter your Admin or Key User name and password.

On the SSL page, for Use SSL, select To Secure Pages and Passwords. 

Restrict access to the CentreWare IS SNMP and SSL pages:

Select Administrative Security Settings on the left sidebar.

If prompted, enter your Admin or Key User name and password.

On the Administrative Security Settings page, clear the View Configuration Web 
Pages and Modify Configuration Web Pages check boxes for users who should not 
have access to these pages.

Configure SNMP v3 by setting up the SNMP Administrative and Key User accounts:

Select the Protocols folder on the left sidebar, and then select SNMP. 

If prompted, enter your Admin or Key User name and password.

On the SNMP Configuration page, click the Configure SNMP v3 button and set up 
the SNMP Administrative account. For more information, see 

on page 4-16.