NEC NP300 Guía Del Usuario
9
3. Projecting an Image (Basic Operation)
After Use
Preparaton: Make sure that the projector s turned off.
1. Unplug the power cable.
2. Disconnect any other cables.
3. Retract adjustable tilt foot if extended.
4. Cover the lens with the lens cap.
5. Put the projector and accessories in the supplied soft case.
Place the projector in the soft case with the lens facing upward as shown below. This is to prevent the lens from
Place the projector in the soft case with the lens facing upward as shown below. This is to prevent the lens from
damage.
NOTE: The NP600S and the NP500WS do not come with a soft case.
NOTE: When placing the projector in the soft case, retract the tilt foot and the rear feet. Failure to do so may case damage to the
projector.
projector.
CAUTION:
Use caution when putting the projector in the soft case immediately after the projector has been operating. The
projector cabinet is hot.
projector cabinet is hot.
SE
LE
CT
M
EN
U
E
X
IT
ENTE
R
ST
AT
U
S
LA
M
P
AU
TO
AD
J.
SO
U
R
CE
FO
CU
S
STA
TUS
LAM
P
AUT
OAD
J.
SOU
RCE
SEL
ECT
MEN
U
E
X
IT
ENTER
FOC
US
Insert the projector with the lens
facing upward
facing upward