Linksys WAG54G Instruccion De Instalación
A Division of Cisco Systems, Inc.
®
Model No.
Quick Installation
Model No.
Wireless
WAG54G
ADSL Gateway
Wireless-
G
Package Contents
• Wireless-G ADSL Gateway
• User Guide on CD-ROM
• Ethernet Network Cable
• Phone Cable
• Power Adapter
• Microfilter(s) (not supplied with all
• User Guide on CD-ROM
• Ethernet Network Cable
• Phone Cable
• Power Adapter
• Microfilter(s) (not supplied with all
model numbers)
• Quick Installation
• Registration Card
• Registration Card
1
In Step 1, you will connect the
Gateway to your ADSL line and to
the computers in your home or
business.
First, make sure that all the devices
that you’ll be working with are
powered down, including your PCs
and the Gateway.
A
Connect one end of the
provided phone cable to the
ADSL port that is on the back of
the Gateway. (Figure A)
B
Connect the other end of the
phone cable to the wall jack
with ADSL service. (Figure B)
C
Connect one end of the
provided Ethernet cable to
your PC’s Ethernet adapter
(Figure C1). Connect the other
end of the cable to one of the
LAN ports on the back of the
Gateway (Figure C2). Repeat
this process for every PC that
you want to connect to the
Gateway.
If you are connecting more
than four PCs to the Gateway,
you will also need to connect
a hub or switch to the
Gateway.
2
Connect the ADSL Gateway
In Step 2, you will configure your
Linksys Wireless-G ADSL Gateway to
be able to gain access to the
Internet through your Internet Service
Provider (ISP). You will need the setup
information provided by your ADSL
ISP. If you do not have this
information, please contact them
before proceeding.
The instructions from your ISP tell you
how to set up your PC for Internet
access. Because you are now using
the Gateway to share Internet
access among several computers,
you will use the setup information to
configure the Gateway instead of
your PC.
NOTE:
You only need to
configure the Gateway
once using the first
computer you set up.
A
Open your web browser. (You
may get an error message at
this point. Continue following
these directions.) Enter
http://192.168.1.1 in the web
browser’s Address field. Press
the Enter key.
B
An Enter Network Password
window, shown in Figure B, will
appear (Windows XP users will
see a Connect to 192.168.1.1
window). Enter admin in
lowercase letters in the User
Name field, and enter admin
A
Configure the ADSL Gateway
A
B
NOTE:
If your PC’s Ethernet
adapter is not set up,
refer to the Ethernet
adapter’s user guide for
more information.
D
Connect the power adapter to
the Gateway. Connect the
power adapter to the electrical
outlet. (Figure D)
E
Turn on the Gateway. Then,
turn on the first PC that you
want to use to configure the
Gateway.
NOTE:
A small device called a
microfilter may be
necessary between
each phone and wall
jack to prevent
interference. Contact
your ISP if you have any
questions.
Proceed to Step 2: Configure the
ADSL Gateway.
GHz
2.4
802.11g
B
D
C
1
C
2
IMPORTANT:
Make sure to only
place the microfilters between the
phone and the wall jack and not
between the Gateway and the wall
jack or your ADSL will not connect.
phone and the wall jack and not
between the Gateway and the wall
jack or your ADSL will not connect.