Conairphone sw3414 Guía De Operación
To Program
1.Lift the handset. Listen for dial tone.
2.Press and release the Store Key.
3.Dial the number to be stored. (The
telephone will not dial out.)
4.Press and release Store Key again.
5.Press the number Key (0-9) on the
telephone key pad where you want the
number stored. Replace handset in cradle.
To Retrieve Memory Numbers
1.Lift the handset. Listen for dial tone.
2.Press and release Memory Key.
3.Press the Number Key (0-9) where desired
number is stored.
1.Lift the handset. Listen for dial tone.
2.Press and release the Store Key.
3.Dial the number to be stored. (The
telephone will not dial out.)
4.Press and release Store Key again.
5.Press the number Key (0-9) on the
telephone key pad where you want the
number stored. Replace handset in cradle.
To Retrieve Memory Numbers
1.Lift the handset. Listen for dial tone.
2.Press and release Memory Key.
3.Press the Number Key (0-9) where desired
number is stored.
TROUBLE SHOOTING GUIDE
DON’T RETURN IT YET!
If you have followed the instructions in this
manual, and have difficulty operating your
CONAIRPHONE
manual, and have difficulty operating your
CONAIRPHONE
TM
telephone locate the
PROBLEM in the left column. Check the
corresponding POSSIBLE CAUSE and
CORRECTIVE ACTION columns to locate and
remedy problem. If the solution to your
problem is not listed below, call our toll-free
service number 1-800-366-0937 and one of
our experts will talk you through the problem.
corresponding POSSIBLE CAUSE and
CORRECTIVE ACTION columns to locate and
remedy problem. If the solution to your
problem is not listed below, call our toll-free
service number 1-800-366-0937 and one of
our experts will talk you through the problem.
HEARING AID COMPATIBILITY
Your CONAIRPHONE
Your CONAIRPHONE
TM
telephone is compatible
with inductively coupled hearing aids.
FCC WANTS YOU TO KNOW
This equipment complies with part 68 of the
FCC rules and ACTA technical requirements.
On the bottom of the base of this equipment is
a label that contains, among other
information, the Registration Number and
Ringer Equivalence Number (REN) for this
equipment. You must, upon request, provide
this information to your telephone company.
This equipment complies with part 68 of the
FCC rules and ACTA technical requirements.
On the bottom of the base of this equipment is
a label that contains, among other
information, the Registration Number and
Ringer Equivalence Number (REN) for this
equipment. You must, upon request, provide
this information to your telephone company.
The USOC number of the registration jack for
the equipment is RJ11C.
the equipment is RJ11C.
The FCC compliant telephone cord and
modular plug is provided with this equipment.
This equipment is designed to be connected
to the telephone network or premises wiring
using a compatible modular jack which is
TIA/EIA-IS-968 compliant.
modular plug is provided with this equipment.
This equipment is designed to be connected
to the telephone network or premises wiring
using a compatible modular jack which is
TIA/EIA-IS-968 compliant.
The REN is useful to determine the quantity of
devices you may connect to your telephone
line and still have all of those devices ring
when your telephone number is called. In
most, but not all areas, the sum of the RENs
of all devices connected to one line should not
exceed five (5.0). To be certain of the number
of devices you may connect to your line, as
determined by the REN, you should contact
your local telephone company to determine
the maximum REN for your calling area.
devices you may connect to your telephone
line and still have all of those devices ring
when your telephone number is called. In
most, but not all areas, the sum of the RENs
of all devices connected to one line should not
exceed five (5.0). To be certain of the number
of devices you may connect to your line, as
determined by the REN, you should contact
your local telephone company to determine
the maximum REN for your calling area.
If your telephone equipment causes harm to
the telephone network, the telephone
company may discontinue your service
temporarily. If possible, they will notify you in
advance. But if advance notice isn’t practical,
you will be notified as soon as possible. You
will be informed of your right to file a
complaint with the FCC.
the telephone network, the telephone
company may discontinue your service
temporarily. If possible, they will notify you in
advance. But if advance notice isn’t practical,
you will be notified as soon as possible. You
will be informed of your right to file a
complaint with the FCC.
Your telephone company may make changes
in its facilities, equipment, operations, or
procedures that could affect the proper
functioning of your equipment. If they do, you
will be notified in advance to give you an
opportunity to maintain uninterrupted
telephone service. If you experience trouble
with this telephone equipment the telephone
company may ask that you disconnect this
equipment from the network until the problem
has been corrected or until you are sure that
the equipment is not malfunctioning.
in its facilities, equipment, operations, or
procedures that could affect the proper
functioning of your equipment. If they do, you
will be notified in advance to give you an
opportunity to maintain uninterrupted
telephone service. If you experience trouble
with this telephone equipment the telephone
company may ask that you disconnect this
equipment from the network until the problem
has been corrected or until you are sure that
the equipment is not malfunctioning.
This equipment may not be used on coin
service provided by the telephone company.
Connection to party lines is subject to state
tariffs.
service provided by the telephone company.
Connection to party lines is subject to state
tariffs.
This equipment is hearing aid compatible.
Warning: Changes or modifications to this
unit not expressly approved by the party
responsible for compliance could void the
user’s authority to operate the equipment.
unit not expressly approved by the party
responsible for compliance could void the
user’s authority to operate the equipment.
ADDITIONAL INFORMATION
A. When your CONAIRPHONE
TM
telephone is
not in use, make sure the handset is
engaged into the base unit.
engaged into the base unit.
B. Avoid rough handling, areas with excessive
moisture, heavy dust or extreme
temperature.
temperature.
C. To clean, use a mild detergent and slightly
damp cloth, never use strong solvents or
abrasives.
abrasives.
D. Connecting this telephone to a coin operated
telephone or a party line is prohibited by law.
E. If it is determined that your telephone is
malfunctioning, the FCC requires that it be
disconnected from the modular outlet until
the problem has been corrected.
disconnected from the modular outlet until
the problem has been corrected.
SERVICE
According to FCC regulations this equipment
which has been certified and registered by the
FCC, may only be repaired by authorized
person or the FCC certification may be voided.
Should you encounter any problems, please
call the Conairphone toll-free Customer
Hotline for assistance:
which has been certified and registered by the
FCC, may only be repaired by authorized
person or the FCC certification may be voided.
Should you encounter any problems, please
call the Conairphone toll-free Customer
Hotline for assistance:
1-800-366-0937, Monday-Friday
between the hours of 8:30 am - 9:00 pm
(EST) and Saturday 8:30 am - 12:30 pm
(EST). You can also visit our website
www.conairphone.com
between the hours of 8:30 am - 9:00 pm
(EST) and Saturday 8:30 am - 12:30 pm
(EST). You can also visit our website
www.conairphone.com
ONE YEAR LIMITED WARRANTY
This Conairphone
TM
telephone is warranted to
the original purchaser to be free from defects
in materials and workmanship under normal
installation, use, and service for a period of
one (1) year from the date of purchase as
shown on the purchaser’s receipt.
in materials and workmanship under normal
installation, use, and service for a period of
one (1) year from the date of purchase as
shown on the purchaser’s receipt.
The obligation of Conairphone
TM
Retail Sales
under this warranty shall be limited to repair
or replacement (at our option) during the
warranty period of any part which proves
defective in material or workmanship under
normal installation, use, and service.
Products returned to us or to an Authorized
Service Center must be accompanied by a
copy of the purchase receipt. In the absence
of such purchase receipt, the warranty period
shall be one (1) year from the date of
manufacture. To obtain service under this
warranty, return the defective product to the
service center together with your sales slip
and $5.00 for postage and handling.
(California residents need only provide proof
of purchase).
or replacement (at our option) during the
warranty period of any part which proves
defective in material or workmanship under
normal installation, use, and service.
Products returned to us or to an Authorized
Service Center must be accompanied by a
copy of the purchase receipt. In the absence
of such purchase receipt, the warranty period
shall be one (1) year from the date of
manufacture. To obtain service under this
warranty, return the defective product to the
service center together with your sales slip
and $5.00 for postage and handling.
(California residents need only provide proof
of purchase).
This warranty shall be invalid if the product is
damaged as a result of defacement, misuse,
abuse, neglect, accident, destruction or
alteration of the serial number, improper
electrical voltages or currents, repair alteration
or maintenance by any person or party other
than our own service facility or an authorized
Service Center, or any use violative of
instructions furnished by us.
damaged as a result of defacement, misuse,
abuse, neglect, accident, destruction or
alteration of the serial number, improper
electrical voltages or currents, repair alteration
or maintenance by any person or party other
than our own service facility or an authorized
Service Center, or any use violative of
instructions furnished by us.
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
No dial tone
Improper Installation
Recheck all modular plug connections
Problem with the wiring
Try another phone jack. If your phone works on
another jack, you may have a problem with your
wiring. Contact your local phone company.
another jack, you may have a problem with your
wiring. Contact your local phone company.
Cannot make
outgoing calls
outgoing calls
Tone/Pulse switch is not set
correctly may have pulse
dialing service.
correctly may have pulse
dialing service.
Check the Tone/Pulse switch. If positioned in Tone
(T) mode, switch to Pulse (P) you may have pulse
dialing service.
(T) mode, switch to Pulse (P) you may have pulse
dialing service.
The phone
does not ring
does not ring
Ringer On/Off switch is not set
correctly
correctly
Set the ringer switch to the On position.
Too many telephones are
installed on the same line
installed on the same line
Contact your local telephone company to determine
the maximum number of extensions for your calling
area.
the maximum number of extensions for your calling
area.
The sound
volume is too low
volume is too low
Another extension is off hook
Hang up extension.
8
9
10
11