Escient taurus Guía Del Usuario
FIREABALL REMOTE CONTROL GUIDE WD046-1-2
4/30/2007
o
“01370” for FB1
o
“01371” for FB2
o
“01372” for FB3
o
“01373” for FB4
The LED will again flash twice indicating the programming was successful.
Repeat these steps for each FireBall in your system, selecting a different FB button for each.
Programming the Universal Source Buttons
Use the following steps to program the AUX, CBL, DVD, TV, and RCV source buttons to
control other devices. The following table indicates which device types can be programmed on
which source buttons:
control other devices. The following table indicates which device types can be programmed on
which source buttons:
Source Button
Device Assignment
TV TV
CBL
CBL
Cable, Video Accessories, Satellite, DSS
RCV
Amplifier, Tuner, Phono, Misc. Audio, CD, Home Automation, MD
DVD
VCR, Audio Cassette, DVD, LDP, DAT, PVR
Locate the 5 digit device code for the device you want to control in Appendix A.
Press the source button to be programmed.
Press & Hold the “Code Set” button on the remote until the LED flashes twice.
Enter the 5 digit code using the remote’s numeric keypad. The LED will flash twice
Press the source button to be programmed.
Press & Hold the “Code Set” button on the remote until the LED flashes twice.
Enter the 5 digit code using the remote’s numeric keypad. The LED will flash twice
indicating the code was accepted.
Note: If the LED does a single long flash then the entered code was not valid for that source
button.
See Appendix B for details and instructions for accessing the other various functions available
on the remote control:
6640 Intech Blvd. Suite 250 Indianapolis, IN 46278 317.616.6789 phone 317.616.6790 fax www.escient.com