Netopia 3220-h Guía Del Usuario
Cayman 3220-H User’s Guide
Using the Command Line Interface
December 2000
4-19
option (off) [on | off]:
on
You can accept the default value for a field by pressing the Return
key. To use a different value, enter it and press Return.
key. To use a different value, enter it and press Return.
You can enter the CONFIG step mode by entering
set
from the top
node of the CONFIG hierarchy. You can enter step mode for a
particular service by entering
particular service by entering
set service_name
. For example:
Dogzilla (top)>>
set system
Stepping set mode (press Control-X <Return/Enter> to
exit)
...
system
name (“Dogzilla”):
Mycroft
Diagnostic Level (High):
medium
Stepping mode ended.
Validating Your
Configuration
Configuration
You can use the validate CONFIG command to make sure that your
configuration settings have been entered correctly. If you use the
configuration settings have been entered correctly. If you use the
validate
command, the Cayman 3220-H verifies that all required
settings for all services are present and that settings are consistent.
Dogzilla (top)>>
validate
Error: Subnet mask is incorrect
Global Validation did not pass inspection!
You can use the
validate
command to verify your configuration
settings at any time. Your Cayman 3220-H automatically validates
your configuration any time you save a modified configuration.
your configuration any time you save a modified configuration.